KEYENCE LK-H2 - Manual (Page 31)

3-7
3
3 Window Functions and Operation
„ Executing ABLE tuning
1
Click "ABLE Tuning".
The "ABLE Tuning" dialog appears.
• If you do not want to download the settings to the controller when tuning starts,
uncheck "Send the PC settings to the controller while executing is in progress".
• The controller enters communications mode when ABLE tuning is in progress.
2
Click "Start" to start tuning.
3
Click "Stop".
Tuning ends. The optimal settings are configured automatically.
Clicking "Cancel" aborts the tuning process and leaves the settings unchanged.
„ Copying the head settings to another head
This example explains how to copy the settings for HEAD01 to HEAD02.
1
Complete all settings for HEAD01.
2
Click "Copy the Head setting".
The "Paste the copied head setting" button becomes active.
3
Click "HEAD02".
The settings can also be copied to the head settings in a different program number. In
this case, select the program number to copy the settings and then select the head.
4
Click "Paste the copied head setting".
The settings for HEAD01 are copied to HEAD02.
NOTE
NOTE
Reference