KEYENCE LK-H2 - Manual (Page 56)

3-32
3
3 Window Functions and Operation
(3) Model display
Indicates the model of the head used to acquire the displayed waveform.
(4) Waveform display manipulating tool bar
Zoom/shrink
Zooms/shrinks the waveform vertically and horizontally.
Move display position
Moves the waveform up or down.
ABLE
Displays the waveform after applying ABLE processing to the displayed peak waveforms
1 to 4 if "Measurement mode" is set to "Transparent object-2". Refer to the LK-G5000 series
User's manual, "Chapter 3 Function settings" (page 3-1) for details on the ABLE function.
Hide mask range setting cursor
Hides the mask range setting cursor if the mask setting is ON.
Mask range setting cursor selection
Selects and displays the mask range setting cursor if the mask setting is ON.
Head display selection
Selects the head to display the received light from.
(5) Received light waveform display
Displays the waveform of received light data. The white vertical line superimposed on the
waveform represents the current measurement position.The waveform is read as follows.
•
X axis: Position of received light waveform. The farther left the waveform, the closer the
received light waveform is to the head.
• Y axis: Intensity of received light. The higher the waveform, the stronger the light
intensity.
• Waveform display: Displays the waveform after the controller applies ABLE processing.
(6) Help
Opens the LK-Navigator 2 help file.
(7) Exit
Closes the "Received light waveform display".
(8) Overlap the waveforms
Superimposes the current waveform over the previous waveform when the mouse was
clicked.
(9) Copy the screen image
Copies the current waveform to the clipboard.