KEYENCE LK-H2 - Manual (Page 49)

3-25
3
3 Window Functions and Operation
(2) Ethernet
IP Address
Sets the controller's IP address.
Subnet mask
Sets the subnet mask for the controller.
Gateway
Sets the gateway for the controller.
(3) Basic setting
No. of used heads
Sets the number of heads the controller can use.
No. of used OUT
Sets the number of OUTs the controller can use.
No. of used analog Ch
Sets the number of analog output channels the controller can use.
Panel lock
Sets whether to lock the display panel connected to the controller.
This setting takes effect after it is downloaded to the controller.
Program change
Sets the method for selecting a program.
If program selection is set to "External terminal", LK-Navigator 2 will, after downloading or
uploading the settings, select the program number specified by the external terminal.
Reference