KEYENCE TM-3000 Series - Manual (Page 20)

3-2
Operat
ion
s wit
h t
h
e Set
ting
File
s
- Setup software TM-H1 TM-Navigator User’s Manual -
Reading and Saving Setting Files
Reading and Saving Setting Files
There are two types of setting files used by TM-Navigator:
Program files (*.prs)
Environment setting files (*.ens)
This section describes how to read setting files from the
computer and save files to the computer.
Reference
• Program files include all of the settings in program No. 0
to 15.
• Program files and environment setting files are
managed separately.
Reading and Saving Program Files
Reading program files
1
Select [Open program file] from the
[File] menu.
The [Open] dialog appears .
2
Select a program file (*.prs) to read and
click the [Open] button.
The program file is read .
Saving program files
1
Select [Save program file] from the
[File] menu.
The [Save] dialog appears.
2
Enter a program name and click on the
[Save] button.
The program file is saved.
Reference
• If a previously saved program file exists with the same
name, the file is overwritten.
• When a master image is registered in the saved
program file, the master registration image is saved in
the BMP format (extension: .bmp).