KEYENCE TM-3000 Series - Manual (Page 44)

4-22
- Setup software TM-H1 TM-Navigator User’s Manual -
Image Storage
Displa
ying
the
Measurem
ent Data
Displaying the [Image storage] window
1
Connect TM-Navigator and the
controller, check that communication
can be established, and then measure
the target.
"Connecting via USB" (page 1-7)
"Connecting via Ethernet" (page 1-9)
2
Click the [Image storage] icon on the
tool bar.
The [Image storage] window appears.
• Select [Image storage] from the [Display] menu.
• Press the "F8" key.
Changing the image storage settings
1
Select the [Common] tab in the main
window and click the [Storage] button.
2
Select [Image storage] from the
[Storage] pull-down menu.
3
Click the [Image storage] icon on the
tool bar.
The [Image storage] window appears.
4
Click the [Image storage] button.
The [Image storage] dialog appears.
Set the "Target Head" and "Storage item".
5
Click the [Send] button on the [Image
storage dialog.
All of the setting data is sent to the controller.
Reference
The image storage settings can also be changed with the
controller.
"TM-3000 Series User's Manual"
Alternative