KEYENCE TM-3000 Series - Manual (Page 26)

4-4
- Setup software TM-H1 TM-Navigator User’s Manual -
View measurement value
Displa
ying
the
Measurem
ent Data
Operating the [View measurement value]
window
1
Connect TM-Navigator and the
controller, check that communication
can be established, and then measure
the target.
"Connecting via USB" (page 1-7)
"Connecting via Ethernet" (page 1-9)
2
Click the [View measurement value]
icon on the tool bar.
The [View measurement value] window appears.
• Select [View measurement value] from the
[Display] menu.
• Press the "F-5" key.
3
Click the [Measurement value acquisition
start] button.
The measurements for the OUT settings that are
configured in the controller appear in the window.
Reference
• If communication is not possible between TM-Navigator
and the controller, or if a head is not connected, the
following dialog appears shortly after clicking the
[Measurement value acquisition start] button or
[Trigger] button.
Check the connection between each head and
between TM-Navigator and the controller.
For more information about the OUT settings, see
"TM-3000 Series User's Manual".
Alternative