KEYENCE TM-3000 Series - Manual (Page 9)

1-5
Gett
ing
Started
Starting and Exiting TM-Navigator
- Setup software TM-H1 TM-Navigator User’s Manual -
„ Step 2-2 When [Read from a file] is selected
When [Read from a file] is selected, TM-Navigator loads
a program file and an environment setting file that have
been saved on the computer.
1
Select [Read from a file] and click the
[OK] button.
The [Open] dialog box appears.
2
Select a program file to read and click
the [Open] button.
The [Start up environment setting (2/2)] dialog
appears.
3
Select [Read Environment Setting] or
select [Start Environment Settings with
default setting].
The operation procedure will differ depending on the
status that [Read Environment Setting] is selected
or [Start Environment Settings with default setting] is
selected.
(1) When [Read Environment Setting] is selected
Select the environment setting file (*.ens)and click the
[Open] button.
The environment setting file is read and TM-Navigator
starts up.
(2) [Start Environment Settings with default setting] is
selected
TM-Navigator starts up with the defaults for the
environment settings.