KEYENCE TM-3000 Series User Manual
Page 30
4-8
- Setup software TM-H1 TM-Navigator User’s Manual -
View Image
Displa
ying
the
Measurem
ent Data
Displaying the [View Image] window
1
Connect TM-Navigator and the
controller, check that communication
can be established, and then measure
the measurement target.
"Connecting via USB" (page 1-7)
"Connecting via Ethernet" (page 1-9)
2
Click the [View Image] icon on the tool
bar.
The [View Image] window appears.
• Select [View Image] from the [Display] menu.
• Press the "F6" key.
Updating the image display
This updates the image displayed on TM-Navigator to the
latest image data in the controller.
1
Connect TM-Navigator and the
controller, check that communication
can be established, and then measure
the measurement target.
"Connecting via USB" (page 1-7)
"Connecting via Ethernet" (page 1-9)
2
Click the [View Image] icon on the tool
bar.
The [View Image] window appears.
3
Click the [Start image capturing] button.
The latest image obtained with the controller appears.
Alternative