AERCO BMK 6000 Dual Fuel - Manual (Page 28)

Benchmark 6000 DF Installation, Operation & Maintenance Manual
CHAPTER 2 – INSTALLATION
Page 28 of 219 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0096_0B
03/21/2014
Ph.: 800-526-0288
GF-141
Refer to the wiring diagram provided below the I/O Box (Figure 2-13) when making all wiring
connections.
FRONT VIEW
Figure 2-12. Input/Output (I/O) Box Location
NOTE
Use Figure 2-13 to determine the functions of the I/O PCB connections. Do
not use the silkscreened labels on the PCB itself, as these may not match
the function names. There is a diagram of the connection functions on the
cover of the I/O Box as well.
DO NOT make any connections to the I/O Box terminals labeled “NOT
USED”. Attempting to do so may cause equipment damage.
CAUTION
I/O PCB
BOARD
TERMINAL STRIPS COVER SCREWS (X2)