AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 234)

Chapter 17: IP Phone Configuration
218 MaxCS 7.5 Administration Manual
4. Enter the following:
Name: AltiGen Server IP Address
Data Type: String
Code: 120
Description: AltiGen Server IP Address
5. Click OK twice.
6. Under the DHCP scope you created is a field labeled Scope Options. Right-click Scope Options and
select Configure Options.
Check option 120 and
enter the IP address of
your MAXCS server in
the String value field
7. Check option 120.
8. Enter the IP address of your MAXCS server in the String value field.
9. Click Apply and OK. The scope now shows option 120.