AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 236)

Chapter 17: IP Phone Configuration
220 MaxCS 7.5 Administration Manual
When You Have Two AltiGen Servers in the Same Network
If there are two AltiGen servers in the same network, some AltiGen IP phones will get the wrong server IP
address and cause log on failure. See the warning in Configuring Auto-Discovery of Server IP Address.
Polycom Configuration
For instructions on using the Polycom tab to configure BLF and Line Park slots for Polycom phones, refer to
the MAXCS 7.5 Polycom Phone Configuration Guide.
Figure 128. The Polycom tab of the IP Phone Configuration page