AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 266)

Chapter 21: Line Park Configuration
250 MaxCS 7.5 Administration Manual
Configuring Line Park
To configure line park, select PBX > Line Park Configuration.
Figure 146. Line Park Configuration window
Setting Up a Line Park Group
1. In the Line Park Configuration window, click the Add button below the Groups list.
2. Enter a name in the dialog box, and click OK.
3. Select line ID numbers from the Non-Member List and click the Add button to add them to the Member
List
.
4. To assign extensions to a group, select the group, and then click the Configuration button below the
Member Extensions panel.