Selecting wp mode, Dlhitislize? v-'n, I1lnu – Brother CM-2000 User Manual
Page 100: 1 = 2suip 3sf type 4= file riftnflgerien, Ihelohlle-h, Rlrinins726»0k, Hneuifile^p, Selecting typing mode -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Wordprocessing
As with using ypurtypewriter in the TW mode, don't be afraid to experiment. You cannot
damage the typewriter by pressing the wrong keys. The worst that can happen is that you
may waste some paper or delete some files from the disk.
Selecting WP Mode
To use your typewriter as a word processor.
I. It’s a good idea to have a disk in the disk drive, for saving your document on later.
However, you can use the wordprocessor without a disk in the drive.
If the disk has not been used before, you may get the following message:
dlHITISLIZE? V-'N
Press
[Y]
to initialize the disk. This may take a few minutes.
2. Press the [2] key to select WP from the MAIN MENU screen.
I1LNU>>
1 = 2sUiP 3SF TYPE 4= FILE riftNflGEriEN'
The following WP index screen will appear,
«!>jp
ihdey
:>
iHElOhlLE-H
RLriniNs726»0K
^■HNEuiFILE^P
This screen tells you how many thousand (K) characters of space are left on the disk, and
gives you the option of creating a new file in either printing or non-printing mode.
(NEWFILE.P or NEWFILE.N)
NEWFILE is simply a blank file in which you can create a new document When saving
your document after creating it, you will need to give it a difterent file name.