Brother CM-2000 - Manual (Page 25)

Setting Up Your Typewriter
You will probably wantto use cursor selection until you become familiar with the machine,
to reduce the possibility of mistakes, but for conciseness we shall always refer to selection
by number.
Selecting TW lets your machine operate as a normal typewriter, but w'lth the useful option
oftyping each line oftext on the liquid crystal display screen, for correction before printing.
WP is the wordprocessor mode. When you select the word processor mode, the text you
type will be displayed on the liquid crystal screen, and you can correct mistakes, insert and
delete words, and perform many other editingfunctions, to make sure that yourdocument
is perfect before you actually print it on paper.
You can also save your documents as files on the floppy disk and recall them at any later
time.
F TYPE selects the Form Typing mode, which you will find a great time-saver if you
frequently have to ПН in pre-pririted forms. Once you have set up the typewriter for a
particular form, you will be able to type in the blank spaces on the form and, when you have
finished typing in one space, the printing carrier will automatically move to the beginning
of the next space.
FILE MANAGEMENT is the mode you will select when you want to carry out operations
on the document files you have stored on a floppy disk, such as copying, renaming, deleting
and so on.
It's easy to switch between the various operating modes of your typewriter. If you are in
WP, F TYPE or FILE MANAGEMENT mode, and need to do some quick typing such as
a short memo or envelope, you can simply press the [TYPE] key to jump into TW mode,
After doing your typing, press the [TYPE] key again to jump back to what you were doing
at the point where you left off.
If you are in TW, WP, F TYPE or FILE MANAGEMENT mode, and want to quit it
completely and select another mode, simply press the [FILE] key. This will allow you to
save your work, then return you to the MAIN MENU, from which you can select a different
option.
Loading Paper
After switching on the machine, you are ready to insert a sheet of paper and set up your
typewriter ready for typing.