Cursor keys, Backspacing, Micro index/reverse index – Brother CM-2000 User Manual
Page 44: Simple backspace
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Typing
Note!
When typing on the display in
TW
or
WP
(non-printing) mode,
[INDEX]
and
[R INDEX]
are used for scrolling the display up and down.
Micro Index/Reverse Index
If
[INDEX]
and
[R INDEX]
are pressed while holding down
[CODE],
the up or down
movement is I /48 inch.
Cursor Keys
X—
^ 1
sset
I
/
The left and right cursor keys - — and —^ move the carriage left or right by one
character. If ft— or is held down for more than 0,5 seconds, the carriage will move
continuously until the key is released. If the cursor keys are used with the
[CODE]
key
held down, the carriage movement is 1/120 inch.
However, when typing on the display
[CODE]
+ — and
[CODE]
+ move the
cursor symbol (^) to the beginning or end of the line respectively,
Backspacing
You may wish to move the carriage back over text you have already typed fora variety
of reasons; for example, to manually underline text, or when making corrections.
Your typewriter has three different backspace functions.
Simple backspace
BKSP
BS1
Press the
[BKSP] key
to move the carnage to the left one space at a time. Holding down
[BKSP]
for more than 0,5 seconds moves the carriage continuously to the left.
Note!
It may appearthat
[BKSP]
duplicates the function of ^—, but when typing on the display
in TW or WP mode, ft— merely moves the cursor to the left, whereas
[BKSP]
moves
the cursor to the left and deletes the text that has been typed.
W
;WEU£