Setting up the typewriter, Setting up the typewriter...............i, Paper supporter – Brother CM-2000 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up Your Typewriter
Setting up the Typewriter
This section tells you how to set up your typewriter for typing. If you
didn't remove the yellow packing pieces and fit the paper supporter
when you unpacked the typewriter, now is the time to do it before
you attempt to power up the machine.
Paper Supporter
The paper supporter is used to check and adjust the position of the paper,
Attach the paper supporter by inserting the tabs into the holes provided on the top of the
typewriter.
The sliding paper guide can be used to adjust the position of the left edge of the paper,
relative to the extreme left position of the print carrier, which is indicated by the ‘O' mark
on the embossed scale.
Support arm
The support arm can be folded out to provide additional support to long sheets of paper.