Correction tape, Removing the old correction tape – Brother CM-2000 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up Your Typewriter
2.
Brother cassette ribbons are available in four different types:
Correctable film ribbon (standard w^ith this model)
One-time
film
ribbon
Multistrike film ribbon
Nylon ribbon
The correctable film ribbon is also available in red, blue, green and brown.
Correction Tape
The correction tape guarantees afaultless document every time. What's more, the bottom
of yourtypewriter will never be full of pieces of old correction paper and lumps of dried
up correction fluid!
Removing the old correction tape
If you need to replace the correction tape, first make sure that the carrier is in the center
of the platen by using the
[SPACEBAR]
or
[BKSP]
key. Then remove the cassette ribbon.
Now just pull out the left and right spools of the old correction tape from the carrier.