Brother CM-2000 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting Typing Mode
Justified typing is turned on by holding down the
[ALTl
key and pressing the
[OPERATE]
key until
J5T
appears in the display.
justified textthat has too few words on a line will not look good, as there will be large gaps
between words. (Typographers call this a loose line).
Also, text such as an address may require to be left -aligned,
To:.
..
Mr: J. Smith,
Bro ther Bouse,
1 .Tame. Street, .
.
■
"Audenshaw, ■
In order to avoid loose lines, and to allow left-alignment of text that requires it, your
typewriter will justify text only if it extends into the hot zone, and the line is ended by a
space or hyphen.
lithe line is ended by a carrier return inside the hot zone, or before the hot zone is reached,
the line will be printed left-aligned.