Setting the hot zone – Brother CM-2000 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Line Format
Note!
If you have selected paragraph indent mode (as described later) and subsequently dearthe
paragraph indent tab, the tab will be cleared but the typewriter will remain in paragraph
indent mode until it is cancelled by holding down [CODE] and pressing [RETURN].
Setting The Hot Zone
ALT
CANCEL
Use of the hot zone was discussed in the section on selecting typing mode.
Tosetthehotzone, hold down
[ALT]
and press the
[HZ SET]
key until the required setting
appears in the display. Each time you press
[HZ],
the hot zone indication will change in
the sequence;
10-> 11
12->5-
Note!
The default setting of the hot zone is 6 characters.
5—>6
U
:wEus