Selecting a line format – Brother CM-2000 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ ■ ' i ; ? ........
Your typewriter has a number of functions that affect the overall
layout and appearance of your document. These are shown in the
table below, together with their factory settings.
Line Spacing
Typing Pitch
Hot Zone
Left Margin
Right Margin
Tabs
Top Margin (Start Position)
Page Length (End Position)
Single
10 characters per inch
6
characters
10 columns in from left
75 columns in from left
Every 10 columns
I inch
Not set
These settings are known collectively as the
LINE FORMAT.
Line Format Memory
If you frequently have to type different types of document, it can be tedious and time-
consuming to change the line format manually every time you have a different job to do.
Fortunately, yourtypewriter makes changing the line format easy, by having five memories
in which line format information can be saved. The contents of all five line format memories
are factory setto the values given in the table above, but you can change them to suit your
own requirements.
Selecting A Line Format
To select a line format, hold down
[ALT]
and press the
[FORMAT]
key.