EVCO EVFTFT618N7U - Manual (Page 21)

EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 21 of 62
6.1.3 Setting an automatic cycle
Below the complete navigation system of the AUTOMATIC menu is illustrated.
It is the real "heart" of the product as all retarder-proofer cycles will be set from this menu and the PROGRAMS and
FAVOURITES menus will be passed on once the saved cycles have been selected.
From this menu it will also be possible to save the cycle set before its execution (from the 10 programs available).
To reach the AUTOMATIC menu from the pre-selection page, press the key at the side of the AUTOMATIC icon:
From this screen it is possible to scroll all
cycle phases using the UP key
Selection of the AUTOMATIC menu allows to set
a complete retarder-proofer cycle In this screen it is possible to modify the cycle
end date by pressing the + key, it can only be
modified day by day
In this screen it is possible to modify each
individual data of the pertinent phase, select the
desired value by pressing the SET button
repeatedly until the desired data
The instrument proposes the first possible hour and the first day
for cycle end on the basis of the times set in the phases (i.e. the
cycle end time with phase 2 duration 0). It is possible to modify
both the date and time of cycle end and modify the cycle set
completely in all phases. From this screen it is possible to start
the cycle by pressing the START/STOP key.
Once the date has been set, press SET to pass
to modification of the time or the START/STOP
key to start the cycle
On completion of customization of all phases, it
will be possible to access the recipes save page,
by pressing the save key.
Once the desired values have been modified via
the + and- keys, press the BACK key to return
to the initial screen or the UP key to pass to the
next page
In this screen it is possible to save the
program with a name already present in the
list via the SAVE key or create a new
program via the SAVE AS key
In this screen it is possible to modify the cycle end time by pressing
the + key.
Once the time has been modified, the cycle can be started by
pressing the START/STOP key.
On this screen it is possible to give the desired name to
the program, thanks to the save as option. The name can
be composed of a maximum of 15 characters