EVCO EVFTFT618N7U - Manual (Page 25)

EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 25 of 62
6.1.7 The PRE-COOLING menu
Below the complete navigation system of the PRE-COOLING menu is illustrated.
This menu allows to activate pre-cooling of the cabinet while waiting to select a retarder-proofer
cycle.
To reach the PRE-COOLING menu from the pre-selection page, press the key at the side of the PRE-COOLING icon:
Note: a cycle can be launched at any time during pre-cooling.
Selection of the PRE-COOLING MENU allows to activate a
pre-cooling while waiting for a retarder-proofer cycle to
be selected
Use the + and – keys to set the desired pre-cooling set-
point; use the START button to start the machine up.
The cycle has infinite duration until a program is
launched. When the first work set-point is reached, the
controller will emit an acoustic signal
The key that indicates the pre-cooling function in the main screen
will have the additional cooling symbol (flashing) to indicate that
the pre-cooling function is in progress