EVCO EVFTFT618N7U - Manual (Page 24)

EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 24 of 62
6.1.6 The FAVOURITES menu
Below the complete navigation system of the FAVOURITES menu is illustrated.
This menu has the purpose of quickly recalling the "favourites" cycles, i.e. the last 10 cycles performed by the machine.
To reach the FAVOURITES menu from the pre-selection page, press the key at the side of the FAVOURITES key:
The selection of a program with hyphens is not allowed. Pressing the set key has no effect.
Selection of the FAVOURITES menu allows the quick selection
of one of the last 9 cycle performed, whether they be
programs, automatic cycles or manual cycles
Use the UP and DOWN keys to scroll the programs available. Once the desired program has
been highlighted, press the SET key to confirm. The program selected will be re-proposed
will all settings in the first automatic cycle selection screen, i.e. with the selection of end
cycle time and date.
From this point, the cycle start-up and setup
management will be the same as those of automatic
cycle setting