2 description, 1 description of the user interface – EVCO EVFTFT618N7U User Manual
Page 8
EVCO S.p.A.
EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page
8
of
62
2 DESCRIPTION
2.1
Description of the user interface
The following drawing illustrates the aspect of the EVFTFT618 user interface.
The following table illustrates the meaning of EVFTFT618 user interface parts.
Part
Part
1
on/off key, herein called also "ON/STAND-BY key"
2
options key, hereon call "MENU key"
3
pre-selection key, hereon call "HOME key"
4
annul key, hereon call "ESCAPE key"
5
cycle start/cycle cut-off key, hereon called "START/STOP key"
6
interactive keys
7
display
8
interactive keys
9
RS-485 serial port with MODBUS communication protocol and communication port with control
module (signal and power supply)
10
USB type serial port
11
jumper for the insertion of the terminating resistor of the user interface-control module
communication port and of the RS-485 serial port
12
earth
For further information, see the next chapters.