7 detail meaning icons status regulators, 8 keyboard lock, 1 silencing the buzzer – EVCO EVFTFT618N7U User Manual
Page 28: 1 manual keyboard lock, 2 automatic keyboard lock
EVCO S.p.A.
EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page
28
of
62
7 Detail Meaning Icons Status Regulators
During the execution of a cycle (both manual and automatic) the states of the main utilities are displayed through the
icons.
7.1
Silencing the buzzer
Press and release any key when the buzzer is ringing. If the buzzer rings to end an automatic cycle or for
pre-cooling temperature reached, as well as by pressing the key, the button also deactivates after the seconds defined by parameter E12.
8 Keyboard lock
The keyboard lock can be managed in manual and automatic mode, the method of use must be set with parameter E8.
8.1
Manual keyboard lock
In this case, to lock and unlock the keyboard it is necessary to press the HOME key for 3 seconds.
8.2
Automatic keyboard lock
In this case, the keyboard will lock after 1 minute of inactivity during the cycle. The HOME key must be pressed for 3
seconds to unlock it.
White light on indicates the compressor is active
Yellow light on indicates the request for compressor activation but safety times not yet expired
Off means compressor is not active
On indicates heating active
Off indicates heating not on
On indicates humidification active
Off indicates humidification not on
On indicates dehumidification active
Off indicates dehumidification not on