EVCO EVFTFT618N7U - Manual (Page 27)

EVCO S.p.A. EVFTFT618 | Installer manual ver. 2.2 | Code 144FTFT618E224
Page 27 of 62
6.1.8.1 The SERVICE menu
Note: if the language is modified, all programs memorised (favourites) will be deleted and those customised (default) will
be taken back to the pre-established values.
Select the language using the UP and DOWN
keys and SET to confirm
SETUP RECORDING allows to access a screen
which will allow to select which variables to
record in the historic data TXT file. By selecting
DELETE RECORDING, it will be possible to delete
the entire data log (procedure protected by
password 149)
Press the SET key to confirm the value of the
password set (the password is -19) and access
the parameters menu
Press the UP and DOWN keys to scroll the
list of variables. Press set to select/unselect
the control boxes. (The value will be saved
when the next variable is selected).Press
BACK to escape
Press the UP and DOWN keys to scroll the
list of parameters. + or – to change the
value at the pre-selected parameter (the
value will be saved when the next variable
is selected). Press BACK to exit