EVCO EC6708 - Manual (Page 30)

Every Control S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY • Phone 0039-0437-852468 (a.r.) • Fax 0039-0437-83648 • [email protected] • www.everycontrol.it 30
OPERATOR MENU
Operator Menu configuration parameters
St 2 status of the user associated to the output K2
It has the same significance of the parameter St 1.
St 3
status of the user associated to the output K3
It has the same significance of the parameter St 1.
St 4
status of the user associated to the output K4
It has the same significance of the parameter St 1.
St 5
status of the user associated to the output K5
It has the same significance of the parameter St 1.
St 6
status of the user associated to the output K6
It has the same significance of the parameter St 1.
St 7
status of the user associated to the output K7
It has the same significance of the parameter St 1.
St 8
status of the user associated to the output K8
It has the same significance of the parameter St 1.
LABEL MIN. MAX. U.M. USERS TOTAL WORKING HOURS
COUNTER
Hr 1 ... 8 total working hours of the user asso-
ciated to the output K1 ... 8
It has the same significance of the family Hr of the Configurator Menu;
see the chapter Configurator Menu on the page 25.
LABEL MIN. MAX. U.M. OPERATOR MENU PASSWORD
OPEr -999 9999 ---- Operator Menu password
It has the same significance of the parameter OPEr of the Configurator
Menu; see the chapter Configurator Menu on the page 25.
LABEL MIN. MAX. U.M. COMPRESSORS POWER MANAGER
Po 1 ... 8 power of the compressor associated
to the output K1 ... 8
It has the same significance of the family Po of the Configurator Menu;
see the chapter Configurator Menu on the page 25.
LABEL MIN. MAX. U.M. USERS RUNNING WORKING HOURS
COUNTER
t r1 ---- ---- hour running working hours of the user
associated to the output K1
t r2 ---- ---- hour running working hours of the user
associated to the output K2
t r3 ---- ---- hour running working hours of the user
associated to the output K3
t r4 ---- ---- hour running working hours of the user
associated to the output K4
t r5 ---- ---- hour running working hours of the user
associated to the output K5
t r6 ---- ---- hour running working hours of the user
associated to the output K6
t r7 ---- ---- hour running working hours of the user
associated to the output K7
t r8 ---- ---- hour running working hours of the user
associated to the output K8
t r1 running working hours of the user associated to
the output K1
It permits to display the running working hours of the user associated to
the output K1 from the moment of the previous user activation.
t r2
running working hours of the user associated to
the output K2
It has the same significance of the parameter t r1.
t r3
running working hours of the user associated to
the output K3
It has the same significance of the parameter t r1.
t r4
running working hours of the user associated to
the output K4
It has the same significance of the parameter t r1.
t r5
running working hours of the user associated to
the output K5
It has the same significance of the parameter t r1.
t r6
running working hours of the user associated to
the output K6
It has the same significance of the parameter t r1.
t r7
running working hours of the user associated to
the output K7
It has the same significance of the parameter t r1.
t r8
running working hours of the user associated to
the output K8
It has the same significance of the parameter t r1.
LABEL MIN. MAX. U.M. ALARM CODES READING
ALAr ---- ---- ---- alarms code reading
ALAr alarm codes reading
If an alarm should be active, it permits to display the alarm code flash-
ing.
LABEL MIN. MAX. U.M. PROBES READING
Pb r ---- ---- (3) suction probe reading
Pb F ---- ---- (4) condensing probe reading (5)
Notes
• the symbol (3) indicates that the unit of measure depends from
the parameter /5P and from the parameters /A6 and /A7 (the
parameters /5P, /A6 and /A7 belong to the User Menu; see the
chapter User Menu on the page 32)
• the symbol (4) indicates that the unit of measure depends from
the parameter /bE (the parameter /bE belongs to the User
Menu; see the chapter User Menu on the page 32): if the
condensing probe is a 2 wires 4-20 mA pressure transducer
the unit of measure depends from the parameters /5P, /b6
and /b7 (the parameters /5P, /b6 and /b7 belong to the User
Menu; see the chapter User Menu on the page 32), if the