EVCO EC6708 User Manual
Page 45
Every Control S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY • Phone 0039-0437-852468 (a.r.) • Fax 0039-0437-83648 • [email protected] • www.everycontrol.it
45
If the compressor/choking valve associated to the output K1 ... 8 LED is
turned on it means that the user associated to the output K1 ... 8 is a
compressor or a choking valve.
If the compressor/choking valve associated to the output K1 ... 8 LED
flashes it means that a count of a disabling time to the compressor
associated to the output K1 ... 8 activation is running; see the param-
eters C 0, C 1 and C 2 (the parameters C 0, C 1 and C 2 belong to the
User Menu; see the chapter User Menu on the page 32).
If the condenser fans associated to the output K1 ... 8 LED is turned on
it means that the user associated to the output K1 ... 8 is a condenser
fans.
If the power step or condenser fans associated to the output K1 ... 8
status LED is turned on it means that the power step associated to the
output K1 ... 8 is loaded or that the condenser fans associated to the
output K1 ... 8 is activated.
SIGNALS AND ALARMS
Signals
SIGNALS
If the minutes LED is turned on it means that the unit of measure of the
displayed quantity is the minute.
If the hours LED is turned on it means that the unit of measure of the
displayed quantity is the hour.
If the bar LED is turned on it means that the unit of measure of the
displayed quantity is the bar or that the displayed quantity is a pressure.
If the Celsius degree LED is turned on it means that the unit of measure
of the displayed quantity is the Celsius degree or that the displayed
quantity is a temperature.
If the data LED flashes it means that a data transmission in a serial
network with EVCOBUS protocol communication managed by a mas-
ter (for instance a Personal Computer) is running