EVCO EC6708 - Manual (Page 32)

Every Control S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY • Phone 0039-0437-852468 (a.r.) • Fax 0039-0437-83648 • [email protected] • www.everycontrol.it 32
USER MENU
Configuration parameters setting - User Menu configuration parameters
CONFIGURATION PARAMETERS SETTING
User Menu configuration parameters are arranged on two levels, to
protect the most tricky settings against undesirable violations and they
are arranged in families that can be recognized through the initial
letter of the label.
To gain access to the first level:
a) keep pushed at the same time for four seconds at least the up
and the down keys (passed four seconds the instrument dis-
plays the label PA).
To select a parameter of the first level:
b) repeat the passage c of the chapter Configurator Menu on
the page 25.
To modify the parameter value:
c) repeat the passages k, l and m of the chapter Configurator
Menu on the page 25.
To gain access to the second level:
d) repeat the passage c of the chapter Configurator Menu on
the page 25 as long as the instrument displays the label PA
e) repeat the passage g of the chapter Configurator Menu on
the page 25
f) push and release over and over the up or the down key within
four seconds as long as the instrument displays -19 (keeping
pushed the up or the down key the value gets increased or
decreased more quickly)
g) after the modification push and release the set key (to the
release of the set key the instrument displays the label PA
again)
h) keep pushed at the same time for four seconds at least the up
and the down key (passed four seconds the instrument dis-
plays /A1, the label of the first parameter of the second level).
To select a parameter of the second level:
i) repeat the passage c of the chapter Configurator Menu on
the page 25 as long as the instrument displays la label of the
desired parameter.
To modify the parameter value:
j) repeat the passages k, l and m of the chapter Configurator
Menu on the page 25.
To turn out from the User Menu configuration parameters setting
procedure:
k) keep pushed at the same time for four seconds at least the up
and the down keys or do not operate with the keys for sixty
seconds at least.
Additional informations
• during a corrupted memory data alarm the access to the User
Menu configuration parameters setting procedure is refused
(see the paragraph Alarms on the page 46)
• the modification of the parameter /bE value has not immedi-
ate effect; to obtain this effect, after the modification discon-
nect and connect again the instrument to the local power
supply
• the modification of a parameter value which unit of measure is
the hour or the minute or the second has not immediate effect;
to obtain this effect it must not be executed during the course
of the value
• the parameters value gets stored in a non volatile memory
even if a lack of power supply happens.
USER MENU CONFIGURATION PARAMETERS
To make easy the configuration parameters consultation of this Menu,