FingerTec AC100 Plus - Manual (Page 23)

23
Plug Pen Drive
MENU
Welcome Check-In
08:24
07-01-08 Mon
Menu 6
User Manage
4 Options
PenDriveMng
When you see this
|
Do this
OK
6
OK
OK
Press once
Press once
Press once
Press once
Press 3 time
Press once
Press 10 time
Press once
Make sure a flash disk is
inserted properly. Press
OK to unplug the flash disk
when the process com-
pletes.
Press once
Options 6
4 System Opt
PowerMng
Comm
Opt
6 System Opt 5
Language ENG
Fmt YY-MM-DD
4 Adv Opt
Adv Opt 5
Two Sensor N
Voice Y
4 Upd Firmware
5
6
OK
6
Copy Date succ OK
Upd Firmware
User could update the firmware version of
a FingerTec® reader by using a flash disk.
Before a user plugged in the pen-drive into a
reader, please make sure that the firmware
file has been copied to the flash disk. Choose
“Upd Firmware” option as shown on the LCD
and the reader will request user to plug in
the flash disk. Plug the flash disk carefully
and press “OK” to start the updating proc-
ess.
Performance of a reader will be enhanced
after the firmware flash disk is upgraded.
Please consult your local dealer for firmware
upgrade patch files as and when nessesary.