Appendix, Troubleshooting, 35 appendix – FingerTec AC100 Plus User Manual

Page 35

Advertising
background image

35

APPENDIX

•

TROUBLESHOOTING

1. I can’t turn on the FingerTec® Fingerprint Reader. When I pressed the power

button, nothing happened.

•

Check if your FingerTec® Fingerprint Reader’s LCD screen is lighted and there is a beep sound when

the reader is turned on. If not, make sure the power in turned on at the electrical supply outlet.

•

Check the connection of the power adapter to an electrical supply outlet; it may not be fitted prop-

erly.

•

If you are confirmed that there is no problem with the power supply, your FingerTec® Fingerprint

Reader may need to be replaced. Kindly contact your reseller.

2. I can’t connect the FingerTec® Fingerprint Reader to the PC. Every time I try it, the

software prompts “unable to connect” message.

First check the settings on the reader to see if TCP/IP or RS232/RS485 connection is enabled.

•

Check whether the COMM key is used, default is 0.

•

For TCP/IP connection, check the IP address.

•

For the RS232/RS485, the baudrate for the reader and software must be the same. Make sure

that the DevID is correct.

•

After changes are made, restart the FingerTec® Fingerprint Reader.

Advertising