FingerTec AC100 Plus - Manual (Page 32)

32
Comm Opt u
4RS232 Yes
RS485
Yes
Note
When RS232 func-
tion is enabled, the
Ethernet will be disa-
bled.
AC100 / AC100 Plus RS232 cable PC
Ethernet 10/100Base-T Straight Thru Cable
This cable will work with both 10Base-T and 100Base-TX and is used to connect a network inter-
face card to a hub or network outlet. These cables are also known as “whips”.
Connector Pin Cable Color Connector
TX+ 1 • White/Orange • 1 TX+
TX- 2 • Orange • 2 TX-
RX+ 3 • White/Green • 3 RX+
4 • Blue • 4
5 • White/Blue • 5
RX- 6 • Green • 6 RX-
7 • White/Brown • 7
8 • Brown • 8
RS232 Connection
1. Setup of RS232
Access to Menu, select “Options” > “Comm. Opt” > “RS232”, select
“Yes” to enable RS232 function.
2. Turn off the reader.
3. Plug the RS232 cable to the RS232 port of the PC.
4. Plug the RS232 other end to the RS232 joint.
5. Turn the power on.