FingerTec m-Kadex Manual - Manual (Page 13)

13 CONTENTS
Using USB Flask Disk
USB flash disk is useful in cases where the terminal is installed far from a PC or there is a
connection problem. To determine the type of USB compatible by the terminal, please
refer to this link at
fingertec.com/newsletter/HL_74.html .
To Download Attendance Logs Only
Plug the USB flash disk to m-Kadex and terminal save all transaction logs into the USB
flash disk automatically.
To Download User Data and Attendance Logs into
USB Flash Disk
Plug in compatible USB flash disk into m-Kadex’s USB port > Wave an administrator card
9 times at the induction area > LED will lit up in green ito indicating that the download
process is running > The LED will blinks in green once to signal that the > Process is
completed > Unplug the USB flash disk from the m-Kadex once the process is done.
To Upload User Data from USB Flash Disk to
m-Kadex
Make sure that the user data already has been loaded into the USB flash disk before
doing this operation.
Plug in a USB flash disk into m-Kadex’s USB port > Wave the administrator card 11 times
at the induction area > LED will lit up in green to iindicate that the upload process is
running > The LED will blinks in green once > the process is completed > Unplug the
USB flash disk from the m-kadex after the upload process is done.