FingerTec TCMS V2 (Abridged Vesion) - Manual (Page 32)

33
The Set Clocking Download Interval
7 Download Data from Terminal
To start, click on the Devices icon and double-click Download data from ter-
minals . This will initiate the Manual Download Clocking Data window. Click
Apply to continue.
Once you have clicked Apply , the data from the connected terminals will be
downloaded into the TCMS V2 and the data will be automatically deleted
after the download process.
Alternatively, you can choose to configure TCMS V2 to specify the interval
time in which it will automatically download the clocking data from the con-
nected terminals.
To confi gure automatic download intervals:
Click on the Devices icon.
In the Devices window, double-click on Set automatic download in-
terval .
The Set Clocking Download Interval window will pop-up. Specify the
duration of the interval and the time the download process will take
place.
Click on Perform daily download when PC is powered on if you want
to download data from the terminal every time your PC is powered
on.