Futaba 4PK 2.4GHz - Manual (Page 102)

103
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
LEVEL2 BIGCAR LEVEL3 LEVEL1 ALLOFF
Menu Type Selection "MENU-T"
Menu Type Selection "MENU-T"
The function selection menu matched to the level of use can be selected from among the
4 types shown below. (The menu type can be set for each model.)
Type (TYPE)
LEVEL1, LEVEL2, BIGCAR,
LEVEL3, ALL OFF
Current set menu type
The set value of the functions removed from the menu when the level was lowered re-
mains effective thereafter. Before lowering the level, turn off the unused functions, and
when there is rate adjustment, etc. related to other functions, check the set values.
Caution when lowering the level
1
(Menu type selection)
Select the setting item "TYPE" by (JOG) button up or down opera-
tion. Select the menu type with the (+) or (-) button.
2
(Menu type change)
Select the setting item "EXEC" by (JOG) button up or down opera-
tion. Press the (+) and (-) buttons simultaneously for 1 second. When
the screen display changes, the change is complete.
3
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button
once).
Type selection
Menu type to be modified
When "BIGCAR" is selected,
brake mixing function (p.74 CH3
brake rate (BKRT) adjustment
is automatically assigned to dial
DL3. Brake mixing function ON
is set with the brake mixing func-
tion. DL3 assignment remains
unchanged even if the type is
changed.
Type change button
- (+) and (-) buttons pressed
simultaneously for about 1 sec-
ond.