Programmable mixes 1, 2 "pmix1, 2, Fu n c tio n, All channels) – Futaba 4PK 2.4GHz User Manual

Page 82

Advertising
background image

83

Fu
n

c

tio

n

(Opening Screen)

MENU 1

Press t

he

button

Calling the setup screen

(Opening Screen)

MENU 2

DIRECT SEL

*Calling from menu screen

Press the button set
at this function.

MENU1/2 selection
by

button

Menu screen call
by

button

Select the function
by

button

Press t

he

button

* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:

s3ELECT

button

* b l i n k s a t t h e c u r r e n t

setup item.

These setup items are different de-
pending on the master channel.

Upper side : LEFT/FWRD/UP

Lower side : RGHT/BRAK/DOWN

Programmable Mixes1, 2 "PMIX1, 2"

These functions allow you to apply mixing between the steering, throttle, channel 3 and
channel 4.

Two programmable mixing systems can be used. The programmable mixing 1 and pro-
grammable mixing 2 set-up screens are independent.

-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)

- The mixing mode selection. (Master mixing mode)

- The master channel mixing center point (point at which the direction changes) can be
offset. (Offset function)

Additional Functions

The movement of the master channel side will be added to the movement of the
slave channel side.

Movement of the slave channel side

When "CUT OFF", which prohibits trigger brake side operation, was set in the boat
mode (p.78), since brake side operation is shut off, when the master channel (MST) is
set to throttle, only "FWRD" side mixing is activated. "BRAK" side mixing is not acti-
vated.

When "TRG-BRK" was set to "CUT OFF" by boat mode function

Programmable Mixes 1, 2 "PMIX1, 2"

(All channels)

Setup items
LEFT :Mixing rate (Left side)
RGHT :Mixing rate (Right side)
MST :Master

channel

SLV :Slave

channel

MODE :Function

ON/OFF

OFST :Offset
MXMD :Mix

mode

TRIM :

Trim

mode

Adjust button
- Adjust with the (+) and (-) but-

tons.

- Return to the initial value "100"

by pressing the (+) and (-) but-
tons simultaneously for about 1
second.

s3ELECT

button

* b l i n k s a t t h e c u r r e n t

setup item.

Advertising