Futaba 4PK 2.4GHz - Manual (Page 116)

117
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
Steering Dual Rate/Second Dual Rate "D/R"
1
(Dual rate adjustment)
Select the setting item "RATE" by (JOG) button up or down op-
eration. Adjust the servo travel with the (+) and (-) buttons.
This dual rate servo travel is linked to the grip dial.
2
When ending setting, return to the initial screen by pressing the
(END) button twice (for function menu screen, press the (END)
button once).
Dual rate adjustment
Steering Dual Rate/Second Dual Rate "D/R" (Steering system)
The steering left and right servo travels are adjusted simultaneously. When you want to
increase the servo travel, adjust the + side. When you want to decrease the servo travel,
adjust the – side. This setting is linked to transmitter grip dial DL1. When DL1 is as-
signed another function, dual rate can be adjusted with this screen.
Setup Item
RATE
:Rate setting (D/R)
Setup item selection
- Select by (JOG) button up or
down operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
D/R rate (RATE)
0~100%
Initial value: 100