Futaba 4PK 2.4GHz - Manual (Page 74)

CH3 active only CH4 active only CH3/CH4 both active
BRK-MODE :"ACT"
Setup item
BRAKE MODE : Function ON/OFF
(CH3/4 can be independently set)
BRK-BKRT : 3rd channel brake rate
(CH3/4 can be independently set)
B34-RATE : 3rd channel brake rate
(CH3/4 common setting)
BRK-EXP : Brake EXP
(CH3/4 can be independently set)
BRK-DLY : Delay amount
(CH3/4 can be independently set)
MENU-1
STM-LFT : Steering mixing left
(CH3/4 can be independently set)
STM-RGT : Steering mixing right
(CH3/4 can be independently set)
MENU-2
ABS-MODE : ABS. function ON/OFF
(CH3/4 can be independently set)
ABS-ABP : ABS. brake return amount
(CH3/4 can be independently set)
ABS-DLY : ABS. delay amount
(CH3/4 can be independently set)
MENU-3
From BRK-DLY of MENU-1
From STM-RGT of MENU-2
From BRK-MODE of MENU-1
From ABS-DLY of MENU-3
From STM-LFT of MENU-2
From ABS-MODE of MENU-3
(Steering left/rjght)
75
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
* When set to BRK-MODE "ACT"
the brake mixing function is ex-
ecuted and the screen display
shown below appears.
The screen which is displayed
is different when CH3 and CH4
are independently ACT and
when both CH3 and CH4 are
both ACT.
Brake Mixing "BRAKE"