Futaba 4PK 2.4GHz - Manual (Page 96)

97
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
Lap List "LAP-L"
In addition to the lap time, the to-
tal time and average lap time are
memorized in the lap memory
after the last lap time.
"LAP" represents the lap time,
"TOTAL" represents the total
time, and "AVE" represents the
average lap.
Lap List "LAP-L"
Call LAP-LIST when checking the lap memory data (each lap time) memorized by lap
timer (page 90, 95 ) operation.
- After the lap timer is started, the lap time is sequentially memorized at each switch op-
eration.
When set time of ALRM passes and the timer is stopped, the last lap is memorized and
the total time is automatically written after the last lap and the average lap is automati-
cally written after that.
-The next Lap-Timer starts at the lap memory number following the average lap (AVE).
1
(Lap memory check)
The cursor can be scrolled and each lap time checked by
(JOG) button up or down operation.
2
(Lap memory reset)
Select the lap memory No. by (JOG) button up or down op-
eration and press the (+) and (-) buttons simultaneously for
about 1 second. The set beeps and the lap memory of the
selected lap memory No. resets.
(Resetting all the lap memory data)
While pressing the (JOG) button, press the (+) and (-) but-
tons simultaneously for about 1 second. The set beeps and
all the data resets.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Using the lap memory
Lap memory No. display
Lap time display