Futaba 4PK 2.4GHz - Manual (Page 65)

Warning display
66
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
Tires grip the track firmly- Car accelerates
Wheels spin- Car does not accelerate
Without Start function
With Start function
Start Function Operation
- When the throttle trigger is moved to the preset position (trigger position: TG.P), the
throttle servo moves to the preset position.
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the first throttle trigger operation at starting. This
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically deacti-
vated and the set returns to normal throttle trigger operation.
Start Function, Engine Cut "START"
Function selection
First, select the function at
the "MODE" item.
"AT&SW" :Start function
"SW" :Engine Cut function
Start Function, Engine Cut "START" (Throttle system)
When the throttle trigger is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly. When
the Start function is activated, merely operating the throttle trigger slowly causes the
throttle servo to automatically switch from the set throttle position to a preset point so
that the tires do not lose their grip and the car accelerates smoothly.
When the switch is pressed, the throttle servo will move to the preset position without
regard to the throttle trigger position. This is convenient when used to cut the engine of
boats, etc. (The function select switch function. See page 86)
Engine Cut Function
If the power switch is turned on while
the preset (engine cut) switch is on, an
audible alarm will be heard. Immedi-
ately set the preset switch to OFF.