Interlogix NS3550-8T-2S User Manual - Manual (Page 115)

User’s Manual of NS3550-8T-2S
115
5. Specify Port-8 to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port while egress. The Port-8
configuration is shown in the following screen in Figure 4-6-1 3 .
Figure 4-6-13: The configuration of VLAN Trunk Port
That is, although the VLAN 2 members: Port-1 to Port-3 and VLAN 3 members: Port-4 to Port-6 also belong to VLAN 1. But with
different PVID settings, packets from VLAN 2 or VLAN 3 is not able to access to the other VLAN.
6. Repeat Steps 1 to 5, set up the VLAN Trunk port at the partner switch and add more VLANs to join the VLAN trunk, repeat
Steps 1 to 3 to assign the Trunk port to the VLANs.