Interlogix NS3550-8T-2S User Manual - Manual (Page 347)

347
Example:
Enable SNMP trap mode.
NS3550-8T-2S:/>security switch snmp trap mode enable
Security Switch SNMP Trap Version
Description:
Set or show the SNMP trap protocol version.
Syntax:
Security Switch SNMP Trap Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c : SNMP version 2c
3 : SNMP version 3
(default: Show SNMP trap version)
Default Setting:
1
Example:
Set SNMP trap version in version 2c.
NS3550-8T-2S:/>security switch snmp trap version 2c
Security Switch SNMP Trap Community
Description:
Set or show the community string for SNMP traps.
Syntax:
Security Switch SNMP Trap Community [<community>]
Parameters:
<community> : Community string. Use 'clear' or "" to clear the string
(default: Show SNMP trap community)