Interlogix NS3550-8T-2S User Manual - Manual (Page 418)

418
Example:
Enable the port queue excess bandwidth mode.
NS3550-8T-2S:/>qos Port QueueShaper Excess 1-10 0-7 enable
QoS Port Shaper Mode
Description:
Set or show the port shaper mode.
Syntax:
QoS Port Shaper Mode [<port_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable port shaper
disable : Disable port shaper
(default: Show port shaper mode)
Default Setting:
Enable
Example:
Enable port shaper mode.
NS3550-8T-2S:/>qos Port Shaper Mode 1-10 enable
QoS Port Shaper Rate
Description:
Set or show the port shaper rate.
Syntax:
QoS Port Shaper Rate [<port_list>] [<bit_rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<bit_rate> : Rate in kilo bits per second (100-3300000)
Default Setting:
500kbps
Example:
Set the port shaper rate in 1000.
NS3550-8T-2S:/>qos Port Shaper Rate 1-10 1000
QoS Port TagRemarking Mode
Description:
Set or show the port tag remarking mode.
Syntax:
QoS Port TagRemarking Mode [<port_list>] [classified|default|mapped]
Parameters:
<port_list> : Port list or 'all', default: All ports
classified : Use classified PCP/DEI values
default : Use default PCP/DEI values
mapped : Use mapped versions of QoS class and DP level
(default: Show port tag remarking mode)
Default Setting:
classified