Interlogix NS3550-8T-2S User Manual - Manual (Page 466)

User’s Manual of NS3550-8T-2S
466
MEP Link Trace state get.
Syntax:
MEP lt state [<inst>]
Parameters:
<inst> : Instance number
MEP Loop Back State
Description:
MEP Loop Back state get.
Syntax:
MEP lb state [<inst>]
Parameters:
<inst> : Instance number
MEP Delay Measurement State
Description:
MEP Delay Measurement state get.
Syntax:
MEP dm state [<inst>]
Parameters:
<inst> : Instance number
MEP Delay Measurement State Clear
Description:
MEP Delay Measurement state clear
Syntax:
MEP dm clear <inst>
Parameters:
<inst> : Instance number
MEP Test Signal State
Description:
MEP Test Signal state get
RX rate is shown in 100 Kbps.
Syntax:
MEP tst state [<inst>]
Parameters:
<inst> : Instance number
MEP Test Signal State Clear
Description:
MEP Test Signal state clear
Syntax:
MEP tst clear <inst>
Parameters:
<inst> : Instance number