Interlogix NS3550-8T-2S User Manual - Manual (Page 473)

User’s Manual of NS3550-8T-2S
473
PTP CurrentDS
Description:
Show PTP clock Current Data set.
Syntax:
PTP CurrentDS <clockinst>
Parameters:
<clockinst>
: clock instance number [0..3]
PTP ParentDS
Description:
Show PTP clock Parent Data set.
Syntax:
PTP ParentDS <clockinst>
Parameters:
<clockinst>
: clock instance number [0..3]
PTP Timingproperties
Description:
Set or show PTP clock Timing properties Data set.
Syntax:
PTP Timingproperties <clockinst> [<utcoffset>] [<valid>] [<leap59>] [<leap61>] [<timetrac>] [<freqtrac>] [<ptptimescale>]
[<timesource>]
Parameters:
<clockinst>
: clock instance number [0..3]
<utcoffset> : PTP clock offset between UTC and TAI in seconds
<valid> : The offsetvalid parameter takes the following values:
false : The UTC offset is not valid
true : The UTC offset is valid
<leap59> : The leap59 parameter takes the following values:
false : no leap59 in current day
true : last minute of current day contains 59 sec.
<leap61> : The leap61 parameter takes the following values:
false : no leap61 in current day
true : last minute of current day contains 61 sec.
<timetrac> : The timetraceable parameter takes the following values:
false : timing is not traceable
true : timing is traceable.
<freqtrac> : The freqtraceable parameter takes the following values:
False : frequency is not traceable
true : frequency is traceable.
<ptptimescale> : The timescale parameter takes the following values:
false : timing is not a PTP time scale
true : timing is a PTP time scale.
<timesource> : [0..255] Time source.
16 (0x10) ATOMIC_CLOCK
32 (0x20) GPS
48 (0x30) TERRESTRIAL_RADIO
64 (0x40) PTP
80 (0x50) NTP
96 (0x60) HAND_SET
144 (0x90) OTHER
160 (0xA0) INTERNAL_OSCILLATOR
PTP PortDataSet
Description:
Set or show PTP port data set.