Interlogix NS3550-8T-2S User Manual - Manual (Page 475)

User’s Manual of NS3550-8T-2S
475
<ap_enable> :
true : Enable the 'P' component in regulator
false : Disable the 'P' component in regulator
<ai_enable> :
true : Enable the 'I' component in regulator
false : Disable the 'I' component in regulator
<ad_enable> :
true : Enable the 'D' component in regulator
false : Disable the 'D' component in regulator
<ap> : [1..1000] 'P' component in regulator
<ai> : [1..10000] 'I' component in regulator.
<ad> : [1..10000] 'D' component in regulator.
PTP SlaveTableUnicast
Description:
Show the Unicast slave table of the requested unicast masters.
Syntax:
PTP SlaveTableUnicast <clockinst>
Parameters:
<clockinst>
: clock instance number [0..3]
PTP SlaveTableUnicast
Description:
Set or show the Unicast Slave configuration.
Syntax:
PTP UniConfig <clockinst> [<index>] [<duration>] [<ip_addr>]
Parameters:
<clockinst>
: clock instance number [0..3]
<index> : [0..4] Index in the slave table.
<duration> : [10..1000] Number of seconds for which the Announce/Sync messages are requested.
<ip_addr> : IPv4 address of requested master clock.
PTP ForeignMasters
Description:
Show PTP port foreign masters data set.
Syntax:
PTP ForeignMasters <clockinst> [<port_list>]
Parameters:
<clockinst>
: clock instance number [0..3]
<port_list> : Port list or 'all', default: All ports
PTP EgressLatency
Description:
Show or clear the One-step egress latency observed in systems where the timestam ping is done in SW.
Syntax:
PTP EgressLatency [show|clear]
Parameters:
show
: Show the observed Egress latency
clear : Clear the observed Egress latency