Interlogix NS3550-8T-2S User Manual - Manual (Page 191)

User’s Manual of NS3550-8T-2S
191
 IP Option Specify the options flag setting for this ACE.
No
: IPv4 frames where the options flag is set must not be able to match this
entry.
Yes
: IPv4 frames where the options flag is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 SIP Filter Specify the source IP filter for this ACE.
Any
: No source IP filter is specified. (Source IP filter is "don't-care".)
Host : Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
Network
: Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
 SIP Address When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
 SIP Mask When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
 DIP Filter Specify the destination IP filter for this ACE.
Any
: No destination IP filter is specified. (Destination IP filter is "don't-care".)
Host : Destination IP filter is set to Host. Specify the destination IP address in the
DIP Address field that appears.
Network
: Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields that
appear.
 DIP Address When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
 DIP Mask When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 ICMP Parameters
Object Description

ICMP Type Filter Specify the ICMP filter for this ACE.
Any
: No ICMP filter is specified (ICMP filter status is "don't-care").
Specific : If you want to filter a specific ICMP filter with this ACE, you can enter a
specific ICMP value. A field for entering an ICMP value appears.

ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.

ICMP Code Filter Specify the ICMP code filter for this ACE.
Any
: No ICMP code filter is specified (ICMP code filter status is "don't-care").
Specific : If you want to filter a specific ICMP code filter with this ACE, you can
enter a specific ICMP code value. A field for entering an ICMP code value
appears.

ICMP Code Value
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value. The allowed range is 0 to 255. A frame that hits this ACE
matches this ICMP code value.
 TCP/UDP Parameters
Object Description

TCP/UDP Source Filter
Specify the TCP/UDP source filter for this ACE.
Any
: No TCP/UDP source filter is specified (TCP/UDP source filter status is
"don't-care").
Specific
: If you want to filter a specific TCP/UDP source filter with this ACE, you
can enter a specific TCP/UDP source value. A field for entering a TCP/UDP
source value appears.
Range
: If you want to filter a specific TCP/UDP source range filter with this ACE,
you can enter a specific TCP/UDP source range value. A field for entering a
TCP/UDP source value appears.

TCP/UDP Source No.
When "Specific" is selected for the TCP/UDP source filter, you can enter a
specific TCP/UDP source value. The allowed range is 0 to 65535. A frame that
hits this ACE matches this TCP/UDP source value.

TCP/UDP Source
Range
When "Range" is selected for the TCP/UDP source filter, you can enter a specific
TCP/UDP source range value. The allowed range is 0 to 65535. A frame that hits
this ACE matches this TCP/UDP source value.

TCP/UDP Destination
Filter
Specify the TCP/UDP destination filter for this ACE.
Any
: No TCP/UDP destination filter is specified (TCP/UDP destination filter