Interlogix NS3550-8T-2S User Manual - Manual (Page 470)

User’s Manual of NS3550-8T-2S
470
ERPS Guard-timeout
Description:
configuring guard timeout for a protection group
guard timeout should be configured in the increments of 10 milliseconds
minimum guard timeout 10ms and maximum 2 seconds
<guard_timeout> : guard timeout
<group-id> : protection group id for configuring guard time.
Syntax:
Erps guard-timeout <guard_timeout> <group-id>
Parameters:
<guard_timeout> : timer timeout values
<group-id> : protection group id 1 - 64
ERPS WRT-timeout
Description:
configuring wait to restore timeout for a protection group
in minutes in the range of 1 to 12 minutes
<wtr_timeout> : configuring wtr timeout
<group-id> : protection group id for configuring wtr time.
Syntax:
Erps wtr-timeout <wtr_timeout> <group-id>
Parameters:
<wtr_timeout>: timer timeout values
<group-id> : protection group id 1 - 64
ERPS Delete
Description:
deletion of a protection group
<group-id> : protection group id for deletion .
Syntax:
Erps delete <group-id>
Parameters:
<group-id> : protection group id 1 - 64
ERPS Topologychange
Description:
specifying topology change propagation parameters for a given protection group
[propagate|nopropagate] : enabling or disabling topology change propagation for a given group
<group_id> : protection group id
.
Syntax:
Erps topologychange [propagate|nopropagate] <group-id>
Parameters:
propagate|nopropagate : topology change propagation configuration
<group-id> : protection group id 1 - 64
ERPS Configurationt
Description:
deletion of a protection group
<group-id> : protection group id
[statistics] : for displaying R-APS statistics
[clear] : for clearing R-APS statistics.