Interlogix NS3550-8T-2S User Manual - Manual (Page 414)

User’s Manual of NS3550-8T-2S
414
(default: Show port policer mode)
Default Setting:
disable
Example:
Enable QoS port policer
NS3550-8T-2S:/>qos Port Policer Mode 1-10 enable
QoS Port Policer Rate
Description:
Set or show the port policer rate.
Syntax:
QoS Port Policer Rate [<port_list>] [<rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<rate> : Rate in kbps or fps (100-15000000)
Default Setting:
500
Example:
Set the port policer rate in 1000
NS3550-8T-2S:/>qos Port Policer Rate 1-10 1000
QoS Port Policer Unit
Description:
Set or show the port policer unit.
Syntax:
QoS Port Policer Unit [<port_list>] [kbps|fps]
Parameters:
<port_list> : Port list or 'all', default: All ports
kbps : Unit is kilo bits per second
fps : Unit is frames per second
(default: Show port policer unit)
Default Setting:
kbps
Example:
Set the port policer unit in fps
NS3550-8T-2S:/>qos Port Policer unit 1-10 fps
QoS Port Scheduler Mode
Description:
Set or show the port scheduler mode.
Syntax:
QoS Port Scheduler Mode [<port_list>] [strict|weighted]
Parameters:
<port_list> : Port list or 'all', default: All ports
strict : Strict mode
weighted : Weighted mode
(default: Show port scheduler mode)
Default Setting: