Interlogix NS3550-8T-2S User Manual - Manual (Page 416)

416
Example:
Set the port schedule mode in weighted mode
NS3550-8T-2S:/>qos Port Scheduler Mode 1-10 weighted
QoS Port Scheduler Weight
Description:
Set or show the port scheduler weight.
Syntax:
QoS Port Scheduler Weight [<port_list>] [<queue_list>] [<weight>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list> : Weighted queue list or 'all', default: All weighted queues (0-5)
<weight> : Scheduler weight (1-100)
QoS Port QueueShaper Mode
Description:
Set or show the port queue shaper mode.
Syntax:
QoS Port QueueShaper Mode [<port_list>] [<queue_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list> : Queue list or 'all', default: All queues (0-7)
enable : Enable port queue shaper
disable : Disable port queue shaper
(default: Show port queue shaper mode)
Default Setting:
disable
Example:
Enable port queue shaper for all port & queue
NS3550-8T-2S:/>qos Port QueueShaper Mode 1-10 0-7 enable
QoS Port QueueShaper Rate
Description:
Set or show the port queue shaper rate.
Syntax:
QoS Port QueueShaper Rate [<port_list>] [<queue_list>] [<bit_rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list> : Queue list or 'all', default: All queues (0-7)
<bit_rate> : Rate in kilo bits per second (100-3300000)
Default Setting:
500kbps
Example:
Set the port queue shaper rate in 1000
NS3550-8T-2S:/>qos Port QueueShaper rate 1-10 0-7 1000
QoS Port QueueShaper Excess
Description:
Set or show the port queue excess bandwidth mode.